Power
Sort by
Display
items per page
TCN-TP-MS308
KEY FEATURES:
Gigabit Mid Span, 16.8W PoE Injector - 8 port. 1U Rack Mount. IEEE802.3af or Passive PoE 400W
TCN-TP-MS316
KEY FEATURES:
- Gigabit Mid Span, 16.8W PoE Injector - 16 port, 1U Rack Mount. IEEE802.3af or Passive PoE output 400W
TCN-TP-SC48-60P-MPPT
- • MPPT Temp Compensated Charging (99.5% Efficient)
- • Color LCD Displays: Battery/Load/Solar Volts/Amps/Watts, Battery Temp, and Battery Level
- • Fully Automatic Operation
- • Auto-ranging 12V/24V/36V/48V Battery Arrays
- • Multimode Load Operation – 4 selectable modes
TCN-TP-SCPOE-1248
KEY FEATURES:
PoE/ Solar 8A Dual Input Battery Charging Controller 12V Battery; 48V Passive PoE out. Up to 130W panel
TCN-TP-SCPOE-1224
KEY FEATURES:
PoE/ Solar 8A Dual Input Battery Charging Controller 12V Battery; 24V Passive PoE out. Up to 130W panel
TCN-TP-SW-8X5
KEY FEATURES:
- Outdoor Enclosure for TP-SWxx 5 port and 8 port PoE switches
- Weatherproof / UV Resistant
TCN-TP-SCPOE-2424-HP
KEY FEATURES:
PoE/ Solar 8A Dual Input Battery Charging Controller 24V Battery; 24V Passive PoE out. Up to 270W panel. 2.6A PoE Input. 60W Total Output
TCN-TPBAT12-50-L
- Longer Cycle Life: Up to 20x over Lead Acid
- Less weight: ~40% less than Lead Acid
- Higher Power: 2x more Watt Hours than Lead Acid
- Stable and Safe Lithium Iron Phosphate (LiFePO4)
- On Board Battery Management (BMS)
TCN-TPDIN-POE-RELAY
- PoE Powered, No Other External Power Required
- Accepts 802.3af/at/bt Class 0 PoE or 24V Passive PoE
- Normally Open and Normally Closed 10A Relay Connections
- Gigabit Data Passthru with Surge Protection
- Wide Operating Voltage Range: -40C to +70C
TCN-TPBAT12-9
KEY FEATURES:
12V 9Ah AGM Sealed Lead Acid Battery. Maintenance Free. 5.94" x 2.56" x 3.9
TCN-TPBAT12-52
KEY FEATURES:
- 12V 52Ah AGM Sealed Lead Acid Battery
- Maintenance Free 9" x 5.4" x 8.6"
TCN-TPDIN-CB-63A
- • DC DIN Mount Circuit Breaker
- • Rated for up to 250VDC @ 100A
- • Mechanical life >10,000 Cycles
TCN-TPW-400DT-12/24
- • Integrated Controller with Dump Load to Optimize
Performance
- • Wind Turbine startup wind speed of 2.1m/s (4.5mph)
- • Smooth and quiet running maintenance free sealed turbine
- • Sealed die cast aluminum housing for protection from harsh
environments
- • Very light and compact
TCN-UPAL48-14-900
- • 48V Charge Controller with 7 Port GigE PoE Switch. Ports can be configured for 802.3at or 24V Passive PoE. Remote Monitoring and Control.
- • Weatherproof, UV resistant, Aluminum Outdoor Enclosure
- • Powered from AC Mains Power and/or Solar
- • Interior Space for Customer Electronics
- • Ground Mounting
TCN-UPAL48-720-900
- • 48V Charge Controller with 7 Port GigE PoE Switch. Ports can be configured for 802.3at or 24V Passive PoE. Remote Monitoring and Control.
- • Weatherproof, UV resistant, Aluminum Outdoor Enclosure
- • Powered from AC Mains Power and/or Solar
- • Interior Space for Customer Electronics
- • Ground Mounting
TCN-UPAL24/48-14-900
- • Configurable as 24V or 48VDC System
- • Weatherproof, UV resistant, outdoor enclosure
- • Powered from AC mains power and/or Solar
- • Interior space for customer electronics
- • Ground Mounting
TCN-TPSM-80X4-UNI
- • Simple, Low Cost Design
- • Flexible Side of Pole Mounting ( up to 4.5” dia. Pole)
- • Heavy Duty Aluminum and Stainless Steel components for long life
- • Easy to Install – Reduced Installation Time
- • Quick tilt adjustment