Cambium
Sort by
CAM-C058940A112A
- • High-performance, scalable and reliable
access points for fixed wireless broadband
- • ePMP 4500 features MU-MIMO and up to
4 Gbps in performance
- • Low TCO with three-year hardware
warranty
- • Interoperable with all Force 400 and
Force 300 Subscriber Modules
CAM-X7-35X-0A00-US
- • Tri-radio/tri-band Wi-Fi 7
- • 6 GHz (2x2), 5 GHz (2x2), 2.4 GHz (2x2)
- • 9.2 Gbps aggregate data rate
- • 2.5 GbE uplink port
- • LPI (low power indoor) mode
CAM-C050045A002A
KEY FEATURES:
- Wide Band - 4.9 - 5.9 GHz
- Increased Tx Power
- Ruggedized, IP66/67
- 802.3at PoE Compatible
- Aux Port with PoE Output
CAM-C058910C122A
ePMP 5 GHz Force 300 CSM Radio (FCC)
CAM-C058940A162A
- Channel Width: 20 | 40 | 80 MHz
- Proprietary Physical Layer: 2x2 MIMO/OFDMA based on 802.11ax underlying technology
- Channel Spacing: Configurable in 5 MHz increments
- Frequency Range: Wide Band Operation 4910-6135 MHz
- Ethernet Interfaced: 100/1000 BaseT, rate auto negotiated, 802.3at compliant & Aux SFP+ port
CAM-C600500C020B
- • Supports 57 to 66 GHz
- • Up to 3.6 Gbps (1.8 Gbps DL and
1.8 Gbps UL). Channel bonding typically
doubles capacity
- • Auto-beamforming, +/- 10º horizontal,
+/- 4.0º vertical
- • 2.5 GbE PoE input AND 2.5 GbE
802.3at PoE output port for powering
external devices
- • 802.11ay standard technology with
Terragraph certification
CAM-C600500D002A
Features:
- Supports 57 to 66 GHz
- Up to 7.6 Gbps (3.8 Gbps UL and 3.8 Gbps DL) with channel bonding
- Easy installation with autobeamforming
- Low latency < 1 ms
- 802.11ay technology with Terragraph certification
CAM-2LTE-ANT-90
- Frequency Range: 2300 MHz to 2700 MHz
- Gain: 16 dBi
- VSWR: 2:1 max
- 3 dB Beamwidth - Azimuth: 90°
- 6 dB Beamwidth - Azimuth: 120°
CAM-C005095H122A
KEY FEATURES:
- Outdoor HotSpot
- 802.11n 2x2 MIMO
- 8 SSIDs Supporting 128 Users
- On-board Captive Portal
- Rate Limiting per SSID and Client
CAM-C009045A001A
KEY FEATURES:
- 100 Mbps Subscriber Capacity in a 20 MHz channel
- Non-Line-of-Site (NLOS)
- Channel Width: 5, 7, 10, 20 MHz
- Frequency Range: 902 - 928 MHz
CAM-C009045B001A
KEY FEATURES:
- Point-to-Point Link (Requires 2)
- 100 Mbps Subscriber Capacity
- Non-Line-of-Site (NLOS)
- Frequency Range: 902 - 928 MHz
- Requires Dual Slant Yagi Antenna
CAM-C050045B004A
KEY FEATURES:
- Ultra Wide Band: 4900 to 5925 MHz
- Rugged Enclosure IP66/IP67
- Dynamic Interference Filtering
- Multifunction AUX Port Allows for Adding a Camera or other PoE Device
CAM-C050045B101A
Features:
- Gigabit Ethernet Interface provides the maximum transfer rates to the device
- 3.5mm audio jack allows direct connection of headphones without any adapters
- New System on a Chip enhances Packet Processing Power more than 4x that of the 450 SM
- Form factor allows the use of existing Offset Reflector dishes
CAM-600SSH
KEY FEATURES:
- Compatible with all PMP models
- Provides Path to Ground (Protective Earth) the Protects Connected Radio Equipment from Near-Miss Lightning Strikes
CAM-C024900C031A
KEY FEATURES:
- Client Device for Point to Multipoint
- Non-GPS Sync
- Highly Scalable
- 200+ Mbps Throughput
- QoS for VoIP, Video and Data
CAM-C024045C001A
KEY FEATURES:
- 4 Mbps of Throughput
- 2x2 MIMO
- Low Latency 2 - 3 ms
- Flexible Channel Width (5,10,20 MHz)
- 125 Mbps per Access Point
CAM-C024900A011A
KEY FEATURES:
- Highly Scalable GPS Syncronized for Channel Re-use
- 200+ Mbps Throughput
- QoS for VoIP, Video and Data
CAM-C024900A021A
KEY FEATURES:
- Connectorized Access Point or Client
- Non-GPS Sync
- Highly Scalable
- 200+ Mbps Throughput
- QoS for VoIP, Video and Data
Refine