McCown Technology Corporation 800-GIGE-POE GbE PoE Surge Suppressor High Voltage

Features & Applications

• GigE Ethernet surge suppression design with low clamp voltages
• Shielded RJ45 connectors provide a ground to shielded plugs
• Ultra fast suppression – typically less than 1.0ps from 0 Volts to BV min
• Faster acting than Thyristor and Gas Tube only designs
• Lower loss and crosstalk than Thyristor based designs
• Ethernet CRC error correction circuit
• Tool-less entry
• Cover is hinged
• Dust tight
• Back knockout feature for concealing wires
• Ultra fast suppression – typically less than 1.0ps from 0 Volts to BV min
• Up to 2.00 amp total (500mA per pair) POE capability (RJ45 limits are 500 mA or less per pair)
• Any polarity on any pair – total flexibility

• Backhaul radios
• Point to point microwave radio powering
• Installed at outdoor tower colocation sites
• Conveying power over unused Cat5/6 cables
• Emergency spare POE
• Pulling power from POE circuits
• Powering Cameras
• Up to 68 volts AC or DC
• Note: Does not allow “split pair” powering for devices like Canopy PMP430, or direc DC-powered devices like PMP100.