No items added
12-212 2.4GHz SmartAmp 500mWatt Indoor Bi-Directional Amplifier
This Bi-Directional amplifier provides the transmit power amplification as well as receive signal gain.
Designed for extending the range of 2.4 GHz wireless radio devices, the SmartAmp™ is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems. The unit provides the transmit power amplification as well as receive signal gain. The built-in dynamic power sensor in SmartAmp™ adjusts the Radio Frequency (RF) power output level by reading the input signal power. This Automatic Gain Control (AGC) Technology, Teletronics' patented technology effectively making the RF amplifiers "Plug & Play" delivers the maximum output power at various input levels while keeping the distortion at a minimum. Ideal for increasing the range of low power radio devices and to compensate for cable loss in certain installations.
Technical Specifications
Features:
500 mWatt Indoor
Operating Range:
2400 - 2500 MHz
Operating Mode:
Bi-directional, TDD
Transmit Gain*:
up to 22 dB
Frequency Response:
± 1 dB
Output Power:
500 mW (+27 dBm)
TX Input Power:
3 dBm (2 mW) min 23 dBm (200 mW) max
Receiver Gain:
12 dB typical
Noise Figure:
3.5 dB typical
LED Inidicators:
RED
GREEN/ORANGE
Solid On: Power and Receiving mode Off: No Power
Blinking: Transmitting
Connectors:
N-type, female, 50 Ohm
Lightning Protection:
Quarter Wave Technology
DC Surge Protection:
Available
Power Consumption:
Tx = 600 mA, Rx = 80 mA @ 7.5V DC
Operating Temperature:
-40 °C to + 70 °C
Dimensions:
3.0" L x 3.0" W x 1.0" H
*Transmit Gain is automatically adjusted
