Teletronics 12-212 2.4GHz Smartamp, 500mW, ID
Availability
Direct from MFG
Ships Direct From Manufacturer
About This Product
12-212 2.4GHz SmartAmp 500mWatt Indoor Bi-Directional Amplifier
This Bi-Directional amplifier provides the transmit power amplification
as well as receive signal gain.
Designed for extending the range of 2.4 GHz wireless radio devices, the
SmartAmp™ is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems. The unit provides
the transmit power amplification as well as receive signal gain.
The built-in dynamic power sensor in SmartAmp™ adjusts the Radio
Frequency (RF) power output level by reading the input signal power.
This Automatic Gain Control (AGC) Technology, Teletronics' patented
technology effectively making the RF amplifiers "Plug & Play" delivers
the maximum output power at various input levels while keeping the
distortion at a minimum.
Ideal for increasing the range of low power radio devices
and to compensate for cable loss in certain installations.
Technical Specifications |
|||||
Features: |
500 mWatt Indoor |
||||
Operating Range: |
2400 - 2500 MHz |
||||
Operating Mode: |
Bi-directional, TDD |
||||
Transmit Gain*: |
up to 22 dB |
||||
Frequency Response: |
± 1 dB |
||||
Output Power: |
500 mW (+27 dBm) |
||||
TX Input Power: |
3 dBm (2 mW) min |
||||
Receiver Gain: |
12 dB typical |
||||
Noise Figure: |
3.5 dB typical |
||||
LED Inidicators: |
|
||||
Connectors: |
N-type, female, 50 Ohm |
||||
Lightning Protection: |
Quarter Wave Technology |
||||
DC Surge Protection: |
Available |
||||
Power Consumption: |
Tx = 600 mA, Rx = 80 mA @ 7.5V DC |
||||
Operating Temperature: |
-40 °C to + 70 °C |
||||
Dimensions: |
3.0" L x 3.0" W x 1.0" H |
||||
*Transmit Gain is automatically adjusted
| Manufacturer | Teletronics |
|---|---|
| On Order | 0 |
Have questions about this product?
Contact UsFound a lower price?
Interested in leasing or financing this product?
See Leasing / Financing Options
