No items added
12-103 SmartAmp Bi-Directional 900 MHz: 10 Watt
Designed for extending the range of 900 MHz wireless radio devices, this is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum.
Full output power of 10 W is achieved with only 16 mW input to the amplifier. Above 16 mW input, the SmartAmp™ attenuates the input signal power and maintains the output power typically at 10W. The built-in dynamic power sensor in SmartAmp™ adjusts the Radio Frequency (RF) power output level by reading the input signal power. This Automatic Gain Control (AGC) Technology, Teletronics' patented technology effectively making the RF amplifiers "Plug & Play" delivers the maximum output power at various input levels while keeping the distortion at a minimum.
Technical Specifications
Features:
10 Watt
Operating Range:
902 - 928 MHz
Operating Mode:
Bi-directional, TDD
Transmit Gain:
28 dB (can be customized to 33dB)
Frequency Response:
± 0.75 dB over operating range
Output Power:
10 Watt (+40 dBm) nominal
TX Input Power:
500mW
Receiver Gain:
12 dB typical ±1 dB
Noise Figure:
3.5 dB typical
LED Inidicators:
RED
GREEN/ORANGE
Solid On: Power and Receiving mode Off: No Power
Blinking: Transmitting
Connectors:
N-type, female, 50 Ohm
Lightning Protection:
Quarter Wave Technology
DC Surge Protection:
Available
Power Consumption:
<2A @ 12-15 VDC (100% duty cycle)
Operating Temperature:
Amplifier: -30 °C to + 70 °C 15V DC injector: -30 °C to + 70 °C
