12-213 2.4GHz Smartamp, 1W, Indoor
This SmartAmp Bi-Directional is ideal for increasing the range of low power radio devices and
to compensate for cable loss in certain installations.
Designed for extending the range of 2.4 GHz wireless radio devices, the
SmartAmp™ is particularly effective when used with Direct Sequence or
Frequency Hopping Spread Spectrum radio modems. The unit provides
the transmit power amplification as well as receive signal gain.
The built-in dynamic power sensor in SmartAmp™ adjusts the Radio
Frequency (RF) power output level by reading the input signal power. This Automatic Gain Control (AGC) Technology, Teletronics' patented technology
effectively making the RF amplifiers "Plug & Play" delivers the maximum
output power at various input levels while keeping the distortion at a minimum.
Ideal for increasing the range of low power radio devices and to
compensate for cable loss in certain installations.
Technical Specifications
|
Features: |
1 Watt Indoor |
Operating Range: |
2400 - 2500 MHz |
Operating Mode: |
Bi-directional, TDD |
Transmit Gain*: |
up to 24 dB |
Frequency Response: |
± 1 dB |
Output Power: |
1 Watt (+30 dBm) |
TX Input Power: |
0 dBm min
23 dBm max |
Receiver Gain: |
17 dB typical |
Noise Figure: |
3.5 dB typical |
LED Inidicators: |
RED |
GREEN/ORANGE |
Solid On: Power
and Receiving mode
Off: No Power |
Blinking: Transmitting |
|
Connectors: |
N-type, female, 50 Ohm |
Lightning Protection: |
Quarter Wave Technology |
DC Surge Protection: |
Available |
Power Consumption: |
Tx = 800 mA, Rx = 130 mA @ 9V DC |
Operating Temperature: |
-40 °C to + 70 °C |
Dimensions: |
3" L x 3" W x 1.07" H |
*Transmit Gain is automatically adjusted
Amplifiers 
Newsletter
